Air quality

You are viewing the archived 2015 report.

Return to the current 2020 report.

Key messages

Why air quality is important?

Good air quality is important to maintain environmental health, including human health. Poor air quality can negatively impact people’s health, particularly children, older people, pregnant women and those with pre-existing respiratory conditions such as asthma. Poor air quality also can reduce visibility and damage our environment and ecosystems. Ground-level ozone damages agricultural crops, forests and plants, reducing their growth rates. Nitrogen oxides, and sulphur dioxide harm soil, lakes and rivers by making them more acidic. This can cause a loss of animal and plant life. Ammonia and nitrogen oxides also disrupt land and water ecosystems by introducing excessive amounts of nutrient nitrogen—a process known as eutrophication.

Release of toxic chemicals into the air can have an impact on human health and the environment. These chemicals are usually only found in trace amounts across Queensland’s urban areas and are subjected to less intensive monitoring.

Understanding air quality in Queensland

Air quality in Queensland has improved significantly over the last three decades and remains relatively good, generally complying with national air quality standards for five of the six major air pollutants. This has been achieved despite the pressures from a growing population, an increase in motor vehicle use and industrial growth. Air quality improvements are a result of Queensland’s regulation of industry, stricter emission standards for motor vehicles and new emission reduction technology.

Most measures of air quality (carbon dioxide, lead, nitrogen dioxide, sulphur dioxide and ozone concentrations) have significantly reduced. Ozone has only exceeded the standards in three of the last 10 years in South East Queensland. Sulphur dioxide has exceeded the standard on a number of occasions in Mount Isa.

Particle pollution is the most significant air quality issue in Queensland with bushfires and dust storms identified as the main causes. Exceedances of visibility-reducing particles and particles less than 2.5 micrometres in diameter show a decreasing trend, but there is no trend in exceedances in particles less than 10 micrometres in diameter.

The majority of the air toxics measured at one location in Brisbane, and one in Gladstone, are at levels well below the national air quality investigation levels.

Historical lead levels throughout Queensland declined dramatically from the 1980s as the lead content in petrol was reduced, and eventually phased out in 2002. Even in the limited areas where lead is still a concern (Mount Isa and Townsville), levels measured show compliance with the national standard and are considerably lower than levels of lead measured in Brisbane during the 1980s.

Key Findings

State

Ozone concentrations

While ozone levels in Townsville and Gladstone have never exceeded air quality standards, South East Queensland experienced exceedences in 2005, 2011 and 2015.

Visibility-reducing particles

Overall there has been a downward trend in the number of days with reduced visibility throughout Queensland over the past decade although significantly more days were affected in 2009 and 2011, due to bushfires.

Particulate concentrations

Particle concentrations have exceeded National Environmental Protection Measures (NEPM) Air Quality Standards since monitoring began in 1986. Exceedences of the PM10 standard show no clear trends while there is a decreasing trend in the exceedences of the PM2.5 standard.

Carbon monoxide concentrations

Carbon monoxide levels have continued to decline over the past decade with levels in the last four years less than 20% of the National Environmental Protection Measures (NEPM) Air Quality Standard.

Lead concentrations

Routine monitoring of lead in air is no longer undertaken in South East Queensland due to the removal of lead in petrol. Lead monitoring results from Mount Isa and Townsville show that lead levels are below the National Environmental Protection Measures (NEPM) Air Quality Standard.

Nitrogen dioxide concentrations

Since 1993, there have been no exceedences of the National Environmental Protection Measures (NEPM) Air Quality Standards and no clear trends over the past decade. Levels of nitrogen dioxide in all regions are consistently well below the standards.

Sulphur dioxide concentrations

Sulphur dioxide levels in all regions do not exceed the National Environmental Protection Measures (NEPM) Air Quality Standards except for Mount Isa where the 1-hour and 24-hour levels exceed the NEPM standards occasionally each year due to smelting operations.

Pressure

Vehicle kilometres travelled

Total motor vehicle travel (cars, trucks, buses), expressed as total vehicle kilometres travelled, shows continued and sustained growth over time.

Number of registered vehicles

The total number of registered motor vehicles shows continued and sustained growth over time.

Vehicle emissions

Emissions from motor vehicles are a function of many factors, but most importantly total travel, fleet mix and emission control technology and driving behaviour.

Major air pollutants

The National Pollutant Inventory (NPI) tracks air pollutant emissions for industrial sources across Australia. The NPI results for industrial sources in Queensland show that several pollutants have generally been trending upwards for the past five years. Increases in industrial emissions for a number of key air pollutants reflect increased demand in commodities.

Programs

National Pollutant Inventory (NPI)

The National Pollutant Inventory (NPI) is a national program, implemented in Queensland under Chapter 6 of the Environmental Protection Regulation 2008 (The Reg). The Reg mirrors the requirements outlined in the NPI National Environmental Protection Measure (NPI NEPM), which are implemented cooperatively by the Australian and Queensland governments through a memorandum of understanding (MOU). The role of the states in the current MOU are summarised as:

  • collection and verification of emissions and transfer data
  • promotion of the database at a state level
  • provision of a representative to the NPI National Implementation Working Group
  • provision of aggregated emissions and transfer data estimation.

The program is aimed at the acquisition of facility-based emissions and transfer data.

The Reg imposes mandatory reporting obligations on facilities triggering specific reporting thresholds. The Reg provides power to the chief executive and delegates to carry out compliance measures should facilities with mandatory reporting requirements fail to meet their obligations.

Queensland Statewide Air Quality Monitoring Program

The statewide ambient air monitoring program provides baseline data to assess Queensland’s air quality against relevant air quality standards or objectives, meet state and Commonwealth legislative reporting obligations, evaluate the effectiveness of management strategies to improve air quality, and inform the public of the state of Queensland’s air environment.

The statewide ambient air quality monitoring network consists of about 30 monitoring stations located in major Queensland population centres to inform Queenslanders about the quality of ambient air within their communities.

Air Advice and Policy Support (AAPS)

The Air Advice and Policy Support (AAPS) program provides advice to the Department of Environment and Heritage Protection and other government departments, in close cooperation with the Air Monitoring unit, to support evidence-based air quality management and policy development. This work provides direct input to national programs that require a well-considered formulation of a Queensland position (e.g. National Clean Air Agreement – NCAA) and air investigations. The core activities of the program are:

  • on-demand scientific support (investigations)
  • air emission inventories (SEQ, Gladstone)
  • software development and maintenance (COPERT Australia).
Air Quality Investigations program

The Air Quality Investigations program supports the statutory role of the Department of Environment and Heritage Protection in investigating complaints, and managing emissions for licenced facilities and compliance and regulatory enforcement activities. The investigative air monitoring program provides the baseline data required to assess the veracity of community concerns and to determine if changes are required to existing industry emissions management.